How to Align CO2 Laser Mirrors: 3-Mirror Beam Alignment for Cleaner Cuts
Learn the logic behind CO2 laser mirror alignment, how to diagnose beam drift and clipping, and how to verify consistent beam delivery across the work area.
Leer artículoBlog de Carverall
Tutorial C1 40W CO2
Guías, tutoriales, ideas de proyectos y notas prácticas para makers, creadores y pequeños negocios.
Artículos recientes
Ideas frescas y guías prácticas
Carverall C1-45W: Complete Setup & Settings
The ultimate step-by-step visual guide to safely setting up and mastering your Carverall C1-45W CO2 Laser.
Leer artículo
How to Laser Engrave & Cut Leather with a 45W CO2 Laser: Settings, Safety & Clean Results
Learn how to engrave and cut leather with a 40W-class CO2 laser using LightBurn material tests, focus, ventilation, and repea...
Leer artículo
CO2 Laser Kerf Test: How to Get Accurate Press-Fit Parts in LightBurn
Learn how to measure CO2 laser kerf, apply Kerf Offset in LightBurn, and tune press-fit parts for more accurate acrylic, plyw...
Leer artículo
How to Focus a 40W CO2 Laser: LightBurn Focus Test, Ramp Test & Clean Cuts
Learn how to focus a 40W CO2 laser with a focus gauge, LightBurn Focus Test, or manual ramp test, plus troubleshooting tips f...
Leer artículo
How to Engrave Photos on Wood with a 40W CO2 Laser: LightBurn Settings & Image Prep
A practical guide to engraving photos on wood with a 40W CO2 laser, covering image preparation, LightBurn image modes, testin...
Leer artículo
How to Calibrate a CO2 Laser Camera in LightBurn: Accurate Placement & Repeat Jobs
Learn how to calibrate and align a CO2 laser camera in LightBurn for accurate placement, repeat jobs, irregular scraps, and m...
Leer artículo
How to Engrave Glass with a 40W CO2 Laser: Settings, LightBurn & Frosted Results
A practical guide to CO2 laser glass engraving with a 40W machine, covering LightBurn testing, image modes, focus, line inter...
Leer artículo
How to Cut Wood with a 40W CO2 Laser: Plywood, MDF & Clean Edges
A practical guide to 40W CO2 laser wood cutting settings for plywood, MDF and solid wood, with LightBurn testing, char reduct...
Leer artículo
