CutLabX
Le logiciel recommandé par Carverall pour les machines laser à diode et infrarouge
Logiciels
Téléchargez CutLabX, LightBurn, LaserGRBL et les fichiers propres à chaque appareil depuis un hub clair.
Logiciels
LightBurn
Une option logicielle laser professionnelle pour les utilisateurs qui ont besoin de mise en page avancée, bibliothèques de matériaux, outils caméra et contrôle de production.
Application mobile
Utilisez cette zone pour les QR codes, notes de configuration mobile ou liens de téléchargement d'application pour les machines Carverall compatibles.
EZCAD
Professional Laser Software for Fiber Laser Engraving Machine.
Compatibilité des machines
MachineRecommended softwareAlso supportsDeviceDownload
A1Diode laser engraver
CutLabXRecommended for a simple Carverall setup workflow.
LightBurn, LaserGRBL
Windows, macOS, mobile app
X1Diode laser engraver
CutLabXGood for desktop engraving and cutting setup.
LightBurn, LaserGRBL
Windows, macOS,mobile app
G2UV laser engraver
SapphireCarverall Self-Developed
SapphireMark
Windows, macOS
Z3Foldable galvo laser engraver
EngraverSpecialized Softwre for Z3
Mobile app
Windows, macOS, mobile app
K15 ProCompact laser engraver
CutLabXUpdate this link if the K15 Pro package is stored separately.
Lasergrbl, Lightburn
Windows, macOS,mobile app
Xmax1Large-format diode laser
CutLabXRecommended for larger engraving and cutting workflows.
LightBurn, LaserGRBL
Windows, macOS,mobile app
K4Portable laser engraver
CutLabXRecommended for Phone Use
Lightburn, LaserGRBL
Windows, macOS,mobile app
Z115W Fiber Laser
BSLRecommended for BSL
Lightburn
Windows
Z1260W MOPA
EZCADRecommended for EZCAD2
Lightburn
Windows
C140W CO2
LightburnRecommended for Lighburn 2.05
Lightburn
Windows
Software support
Frequently asked questions
Quick solutions for common software installation and connection issues.
Which software should I use for my Carverall machine?
Check the Machine Compatibility table above first. CutLabX is recommended for supported Carverall diode, infrared and CO2 machines. LightBurn supports many Carverall models, while EZCAD is intended for compatible Z12 fiber laser machines.
Why can't the software detect my laser engraver?
Make sure the machine is powered on and connected with a data-capable USB cable. Close any other laser software that may be using the connection, reconnect the cable, and restart the software. If the machine is still not detected, install the correct driver and try another USB port.
How do I install or update the USB driver?
Download the driver listed for your machine or follow its user guide. Disconnect the machine, complete the driver installation, restart the computer, and then reconnect the machine. Avoid installing drivers from unofficial download websites.
Why is the COM port missing or unavailable?
Reconnect the machine and check the available ports again. On Windows, confirm that the device appears without a warning symbol in Device Manager. Close other programs that may be using the same port, then select the port that appears after the machine is connected.
The machine is connected. Why won't engraving start?
Confirm that the correct machine profile, work origin and processing area are selected. Check the machine's safety status, emergency stop, cover or cooling system where applicable. Run a frame preview before starting and verify that power and speed settings are suitable for the material.
What should I do if macOS blocks the application?
Confirm that the installer came from the official Carverall or software provider link. Then open System Settings, go to Privacy & Security, and use Open Anyway for the blocked application. You may need to enter your Mac administrator password.
